![]() Elac's rated frequency response for the UF52 is 46Hz to 35kHz and its sensitivity is spec'd at 85dB-a relatively low number for speakers aimed at entry- level audiophiles, though I can't say I had any issue making the UF52 towers play loud when powered by a standard 100Wpc receiver.Įlac's UB52 bookshelf is almost identical to the UF52 tower except for its single woofer and front-facing port. You can adjust the height of each spike using a supplied Allen wrench to account for uneven floors, while supplied caps let you lock in the spike and also provide a finished look. Black mesh plug-in speaker grilles are provided, along with four attachable outrigger feet with carpet spikes and floor discs for installation on wood or tile floors. Three ports are located on the tower's rear, along with a single set of gold-plated five-way binding posts. The UF52 floorstander is a slim, compact three-way tower that features a trio of bass drivers. ![]() While there's no specific Uni-Fi 2.0 subwoofer, the company added its SUB3030 ($800) to the mix to create a full 5.1 system. All speakers sported a basic, no-frills look and arrived in a Black Ash vinyl finish- the lone option Elac offers. The Uni-Fi 2.0 system Elac sent consisted of the UF52 floorstander ($1,200/pair), UB52 bookshelf ($600/pair), and UC52 center channel speaker ($400). Last but not least, especially if you have plans to place the speakers on shelves or in a cabinet, the ports on the book- shelf and center models have been moved from the back to the front baffle. ![]() Version 2.0 also features enhanced internal bracing to add strength to the cabinet and reduce vibration. While the original Uni-Fi lineup had a specified 4-ohm nominal impedance, Uni-Fi 2.0's new crossover design has upped that spec to 6 ohms, enabling compatibility with a wider range of A/V receivers. Woofers have also been upgraded with a new single- piece dished aluminum cone that offers improved stiffness and combines with an oversized magnet and large diameter voice coil to deliver more accurate performance and improved dynamics, according to Elac.Īlso new for Uni-Fi is an enhanced three-way crossover. Elac says the new design enables a better blend with the 4-inch mid-range driver, which itself features a larger diameter voice coil and a new low-profile surround and neodymium magnet assembly. Improvements to be found throughout Uni-Fi 2.0 include an all-new concentric driver featuring a wide-surround 1-inch soft dome tweeter with expanded frequency response. While the new Uni-Fi lineup has a largely similar look to its predecessor, there are many changes to be discussed. The most recent project for Jones has been to revisit the first two series he designed for Elac and create "2.0" versions, including the Uni-Fi 2.0 speakers under review here. According to Elac, this design allows for matched off-axis performance of the tweeter and midrange, which in turn yields a flat frequency response, enhanced imaging, and consistent sound quality throughout the listening space. ![]() One element that has remained constant through this flurry of speaker production is Jones's use of a concentric driver that locates the tweeter at the center of the midrange cone. New speakers arrived in quick succession, including the upscale but still affordable Adante passive and Navis powered models. First out of the gate for Jones was the Debut Series, followed by the Uni-Fi series, both affordable lines designed to pull fresh recruits into the audiophile ranks. While the company itself has been around for considerably longer, back in 2015 it brought on former KEF, Infinity, TAD, and Pioneer chief speaker engineer Andrew Jones to develop new product lines. Germany's Elac is a brand that has greatly expanded its presence in the hi-fi and home theater worlds over the past five or so years. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |